Welds and cuts most materials
The extremely high combustion efficiency of the DHC 2000′s flame leaves virtually no unburnt oxygen in the secondary flame surrounding the weld area. This shields the weld puddle from oxygen contamination, allowing difficult materials to be welded easily.
Independent tests on aluminum and stainless steel verify weld strength equal to Tig welds. The low oxygen content of the secondary flame also minimizes the need for flux. In fact, many operations require no flux at all. As a result, weld operation and post weld cleaning requirements are minimal.
Easy setup and operation
You can cut and weld without changing the tip. A single universal flame setting, “just off feather,” is used for virtually all applications, making the DHC 2000 one of the most straightforward welding systems to adjust and use.
Gas savings up to 60%
Since the DHC 2000 operates at a low gas pressures and produces an extremely efficient flame, you will use far less gas to do most jobs. Many users have reported saving hundreds or thousands of dollars in gas expenses over a lifetime of use.